TF-Ф50+35 Chemical Foam extruder

Equipment Configuration and Technical Specifications

A. Equipment Usage

This equipment is suitable for producing various types of foam wires and cables, as well as low loss cables such as communication transmission lines, such as HDMI, IEEE1394, DVI, ATA, UL2919, etc. It has the characteristics of good extrusion gelation, high efficiency, stable foam, and high degree of automation.

B. Main specifications

1. Manufacturing line type: Used for various types of foam wires, cables, communication transmission lines, and other low loss cables.

2. Extruded materials: Suitable for insulation materials such as FM-PE, PE, PP, PVC, SR-PVC, etc.

3. Conductor diameter: 0.35-2.0mm. (The size of the wire diameter needs to be equipped with corresponding molds)

4. Suitable wire diameter:Ф0.8mm~Ф3.0mm.

5. Maximum wire speed: 0-500m/min (wire speed depends on wire diameter).

6. Center height: 1000mm.

7. Power supply: 380V+10% 50HZ three-phase five wire system.

8. Operation direction: Host (from to operation).

9. Machine color: Overall appearance: Apple green; Bright blue.

C. Main components:

1. Active pay-off rack: 1 set

2. Swing arm tension frame: 1 set

3. Straightening table: 1 set

4. Fully automatic copper wire preheater: 1 set

5. 50 # chemical foaming host (dryer, suction machine): 1 set

6. 35 # vertical injection molding machine: 1 set

7. PLC computer-based control system: one

8. Mobile sink and fixed sink: 1 set

9. Laser diameter measuring instrument: 1 set

10. Electrostatic capacity tester: 1 set

11. Closed double wheel extractor: 1 set

12. Tension storage rack: 1 set

13. Electronic meter counter: 1 set

14. High frequency spark testing machine: 1 set

15. Dual axis take-up machine: 1 set

16. Random spare parts and operation and maintenance instructions: 1 set

17. Complete machine coating: 1 set